Plasti-Paste EPOXY

Trowelable Epoxy Paste

Plasti-Paste™ EPOXY is an epoxy-based version of Smooth-On’s popular urethane Plasti-Paste™ products. It is a two component, fiber-filled epoxy designed for vertical surface application. Part A is a paste and Part B is a liquid. Mix ratio is 2A: 1B by volume or weight. Pot life is 40 minutes and cure time is 16 hours at room temperature depending on mass. Applying heat can reduce cure time. Mixed material holds a vertical surface without sagging and cures very rigid and strong.

Price and Purchasing

Call to Order

Subtotal:
ProductSizeNet WeightPrice
Quantity

Plasti-Paste EPOXY

Trowelable Support Shell Plastic. 2A:1B By Volume Mix Ratio - No Scale Required.
WARNING: Prop 65 Notice
WARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm - www.P65Warnings.ca.gov
 Trial Unit 3 lbs. 6733
Gallon Unit 12 lbs. 18553
5 Gallon Unit 60 lbs. 75228

Document Downloads

Technical Bulletin

Safety Data Sheet

Videos

Plasti-Paste EPOXY Video:

Using Plasti-Paste™ EPOXY to Make a Support Shell for a Brush On Silicone Rubber Mold

Our Edmonton Reynolds Advanced Materials branch will permanently close June 11th. We’re grateful for your support during our time in Canada and look forward to continuing to serve you through
other Canadian distributors.