Reynolds Advanced Materials
Since 1963
My Account

Mold Max® STROKE

Brushable Silicone

Mold Max® Stroke® is a brushable tin silicone rubber that self-thickens for making fast brush-on molds of almost any model. Properly applied, it will hold a vertical surface and will reproduce the finest detail. Mold Max® Stroke® silicone will not stick to most surfaces and will cure with negligible shrinkage to a strong, flexible Shore 30A rubber. 4 thin layers is all that is necessary to make a strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.).


Subtotal: $0.00
ProductSizeNet WeightPrice Quantity
Mold Max Stroke
Brushable tin-cure silicone rubber.
Look Closer Trial Unit 2.2 lbs. $27.25
Look Closer Gallon Unit 11 lbs. $103.30
Look Closer 5 Gallon Unit 55 lbs. $473.66

Technical & Safety

Technical Bulletin


Additional Documents

alertA release agent may be required to remove cured silicone rubber from glass, silicone, or some other surfaces. Many surfaces need to be sealed before applying silicone rubber.
alertThis material has a by-weight mix ratio. An accurate gram scale is recommended.
alertIt is recommended to apply this material by brush.
alertThis material is not compatible with sulfur-based modeling clay.