Reynolds Advanced Materials
Since 1963
My Account


Flexible Urethane Coating

UreCoat® is a two component urethane (A+B) that can be mixed and brushed onto a variety of surfaces to provide a flexible, tough and impact resistant coating. UreCoat® will bond to many surfaces and can be used as a flexible coating for expanded polystyrene (EPS foam), fabric, some metals and plastics, wood, rope (make vines for zoo exhibits) and more. Cured rubber is tough and UV resistant.  UreCoat® has been used to repair damaged or deteriorated latex animatronic skins, masks, etc.

Use as a Flexible Paint Base: UreCoat® is “color neutral” and is easily colored with SO-Strong®, UVO® or Ignite® colorants to create a permanent paint for coating cured Smooth-On urethane rubbers or flexible foams. Cured UreCoat® will bend and flex with the rubber or foam part.

Mix ratio is 100A:10B by weight (gram scale required), pot life is 8 minutes, re-coat time is 30 minutes, tack free time is 2 hours and full cure is 16 hours at 73°F/23°C. UreCoat® contains no phthalates or VOC’s.


Subtotal: $0.00
ProductSizeNet WeightPrice Quantity
Flexible Urethane Coating WARNING: Prop 65 NoticeWARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm -
Look Closer Trial Unit 1.1 lbs. $15.19
Look Closer Gallon Unit 8.8 lbs. $60.95
Look Closer 5 Gallon Unit 44 lbs. $265.00

Technical & Safety

Technical Bulletin

alertThis material has a by-weight mix ratio. An accurate gram scale is recommended.