HX-80™

Brushable Mold Making Latex

HX-80 Brushable Mold Making Latex is a vulcanizable, low viscosity latex featuring high wear resistance and low shrinkage for casting plaster, concrete and wax. Best for making molds of 2-dimensional flat pieces for architectural or decorative objects. Add color with FabTone pigments.  Once adequate coats are applied (generally between 10 as a minimum to 20 layers, depending on model), it cures to a highly elastic, wear resistant mold that captures perfect detail.

NOTE: Latex can be used for limited casting of some resins. The higher the exotherm of the casting material, the quicker the mold will degrade and become unusable.  Mold Max silicone rubbers would be a better choice for production casting of resins.

Call to Order

Subtotal:
ProductSizeNet WeightPrice
Quantity

HX-80

Vulcanizable, low viscosity latex featuring high wear resistance and low shrinkage for concrete casting
WARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm - www.P65Warnings.ca.gov
Quart 2 lbs. 2318
Gallon 8 lbs. 5704
5 Gallon 40 lbs. 18573

Document Downloads

Technical Bulletin

Safety Data Sheet