Free Form™ AIR HT is a low density, lightweight epoxy putty that offers high temperature resistance to 300°F/149°C when cured at room temperature and 400°F/204°C when heat post cured. This is a low-odor, low shrinkage formula that is easy to use. Free Form™ AIR HT is mixed by hand with a 2A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. It can be sanded, shaped, drilled, tapped and CNC machined/routered.
Please note: We do our best to ensure that this material estimator is accurate. However, Reynolds Advanced Materials offers no warranty either expressed or implied regarding the accuracy/reliability of this information. Reynolds Advanced Materials assumes no liability for loss or damage associated with use of material estimators. If this is a critical project, we encourage you to verify estimator results using the long-hand method of correlating the volumetric yield of the material with mold cavity. You can also contact Reynolds Advanced Materials for assistance.