Reynolds Advanced Materials
Since 1963
My Account

Econ® 80

Lower Cost Shore 80A Urethane Rubber

Econ® 80 is a lower cost, faster cure alternative to PMC®-780. This is a no odor system that features a 1A:1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight with minimal shrinkage. Econ® 80 is translucent and easily colored with SO-Strong® or Ignite® colorants. Econ® 80 is often used to make short run molds for casting concrete and resins.


Subtotal: $0.00
ProductSizeNet WeightPriceQuantity
Econ 80
1A:1B mix Shore 80A urethane rubber.
How Does It Work?WARNING: Prop 65 NoticeWARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm -
Look Closer Trial Unit 1.9 lbs. $27.78
Look Closer Gallon Unit 15.2 lbs. $93.52
Look Closer 5-Gallon Unit 76 lbs. $429.37

Technical & Safety

Technical Bulletin


Additional Documents

alertA release agent is required to remove cured urethane rubber from most surfaces.
alertMany surfaces need to be sealed before applying urethane rubber.
alert55-Gallon Drum size units are available for this material. Contact Us for purchase inquiries.