What colors and finishes are possible with FMG?

Article courtesy of Smooth-On, Inc.

A variety of colors and finishes can be incorporated into the FMG face mix. UV stable liquid or dry powder pigments can be added to FMG to provide a vast range of colors. Aggregates can be added to the face mix to achieve desired texture effects when sandblasted and sealed. Metal powders can also be added to the face mix to achieve various cold cast metal effects. After demolding, the cold cast metal can be patinaed or polished to achieve a desired finish in a fraction of the time and cost normally associated with foundry cast metal.

Disclaimer

This FAQ article is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Safety Data Sheets (SDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.

All Reynolds locations will be closed Saturday & Monday, May 28th - 30th in observance of Memorial Day. Resuming normal operations on Tuesday, May 31st.