Rebound™ Series

Rebound 25 & Rebound 40 are easy-to-use silicone rubbers that self-thicken for making brush-on molds of almost any model. Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure to a soft, flexible rubber. Rebound 25 is good for making molds of models with deep undercuts and, depending on model configuration, can be inverted as a glove molds. Rebound 40 is harder and less flexible. Adding THI-VEX™ Silicone Thickener allows for the creation of registration keys and cut shims in the mold.

▶ Watch Video

Rebound™ 25

Brushable, shore A 25 platinum silicone rubber, 1A:1B Mix Ratio By Volume.

Technical Bulletin / Health & Safety

Trial Size

$37.21

1 Gallon Unit

$240.14

5 Gallon Unit

$979.06

🞩
▶ Watch Video

Rebound™ 40

Brushable, shore A 40 platinum silicone rubber, 1A:1B Mix Ratio By Volume.

Technical Bulletin / Health & Safety

Trial Size

$37.07

1 Gallon Unit

$241.44

5 Gallon Unit

$987.84

🞩