UreCoat

UreCoat™ is a two component urethane (A+B) that can be mixed and brushed onto a variety of surfaces to provide a flexible, tough and impact resistant coating. UreCoat™ will bond to many surfaces and can be used as a flexible coating for expanded polystyrene (EPS foam), fabric, some metals and plastics, wood, rope and more. Cured rubber is tough and UV resistant. UreCoat™ has been used to repair damaged or deteriorated latex animatronic skins, masks, etc.

Use as a Flexible Paint Base: UreCoat™ is “color neutral” and is easily colored with SO-Strong™, UVO™ or Ignite™ colorants to create a permanent paint for coating cured Smooth-On urethane rubbers or flexible foams. Cured UreCoat™ will bend and flex with the rubber or foam part.

Mix ratio is 100A:10B by weight (gram scale required), pot life is 8 minutes, re-coat time is 30 minutes, tack free time is 2 hours and full cure is 16 hours at 73°F/23°C. UreCoat™ contains no phthalates or VOC’s.

UreCoat™ Matting Powder can be mixed with UreCoat™ to create a matte coating that can be applied to a variety of surfaces to eliminate gloss or shine.

FOR COMMERCIAL/INDUSTRIAL USE ONLY

UreCoat™

Brushable shore A 70 urethane coating, 100A:10B mix ratio by weight - scale required, 8 minute pot life, 30 minute re-coat, 16 hour cure.

Technical Bulletin / Health & Safety

WARNING: Prop 65

Trial Unit

$20.82

Gallon Unit

$78.67

UreCoat Matting Powder

$31.08

5 Gallon Unit

$305.97

🞩
UreCoat™ Matting Powder

Used with UreCoat to create a matte coating that can be applied to a variety of surfaces to eliminate gloss or shine.

Technical Bulletin / Health & Safety

WARNING: Prop 65

UreCoat Matting Powder

$31.08

🞩