Reynolds Advanced Materials
Since 1963

Mold Max® 14NV & 29NV

Low Viscosity Tin-Cure Silicone Rubber

Mold Max® 14NV and 29NV offer low viscosity, fast cure and long library life. Mold Max® 14NV and 29NV do not require vacuum degassing and will reproduce the finest detail. Suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. They can also be used to create movie special effects. Cure times can be reduced with Accel-T® cure accelerator. Mold Max® 14NV and 29NV can be used to cast a variety of materials including concrete, wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins.

Purchase


Subtotal: $0.00
ProductSizeNet WeightPriceQuantity
Mold Max 14NV
Low viscosity tin cured silicone rubber - Shore 14A hardness. 10:1 mix ratio by weight - scale required.
Look Closer Trial Unit 2.2 lbs. $25.48
Look Closer Gallon Unit 10.45 lbs. $91.75
Look Closer 5-Gallon Unit 52.25 lbs. $422.38
Mold Max 29NV
Low viscosity tin cured silicone rubber - Shore 29A hardness. 10:1 mix ratio by weight - scale required.
Look Closer Trial Unit 2.20 lbs. $25.47
Look Closer Gallon Unit 11.0 lbs. $96.54
Look Closer 5-Gallon Unit 55.0 lbs. $441.87

Technical & Safety

Technical Bulletin

 

Additional Documents

alertA release agent may be required to remove cured silicone rubber from glass, silicone, or some other surfaces. Many surfaces need to be sealed before applying silicone rubber.
alertThis material has a by-weight mix ratio. An accurate gram scale is recommended.
alertThis material is not compatible with sulfur-based modeling clay.