Reynolds Advanced Materials
Since 1963
My Account

TASK® 18

Aluminum Filled urethane Casting Resin

TASK® 18 is a relatively low viscosity aluminum filled urethane casting resin that was developed specifically for making short run vacuum forming molds. TASK® 18 cures overnight at room temperature with negligible shrinkage to a very hard plastic that has a very high compressive and flexural strength. Cured TASK® 18 can be polished, machined, drilled, painted, etc., and is also used to make industrial production parts, prototype parts and tracing patterns.

Purchase


Subtotal: $0.00
ProductSizeNet WeightPriceQuantity
TASK 18
Low viscosity aluminum filled Shore 88D hardness urethane casting resin. 26A:100B mix ratio by weight - scale required.
How Does It Work?WARNING: Prop 65 NoticeWARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm - www.P65Warnings.ca.gov
Look Closer Trial Unit 3 lbs. $27.78
Look Closer Gallon Unit 12.1 lbs. $95.68
Look Closer 5-Gallon Unit 48.5 lbs. $319.67

Technical & Safety

Technical Bulletin

 

Additional Documents

alertA release agent is required to remove cured urethane plastic from most surfaces.
alertThis material has a by-weight mix ratio. An accurate gram scale is recommended.
alertIt is recommended to apply this material by brush.