All Reynolds locations will be closed Thu - Sat, Nov 23rd - 25th in observance of Thanksgiving.
Resuming normal operations on Mon, Nov 27th.
Reynolds Advanced Materials
Since 1963

PMC®-121 Series

Easy To Use Urethane Rubber

The PMC®-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC®-121/30 Dry and PMC®-121/30 Wet are exceptionally strong and abrasion resistant for soft urethane mold rubbers. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. The dry version does not exude an oil and can be used for casting waxes, Smooth-On liquid plastics, gypsum plasters and other materials. The wet version contains a built-in release agent to aid in demolding hard plasters and concrete.

Purchase


Subtotal: $0.00
ProductSizeNet WeightPriceQuantity
PMC-121/30 DRY
Low Viscosity Urethane Rubber - Shore A 30 Hardness - DRY Formula 1A:1B By Volume - No Scale Necessary.
Look Closer Trial Unit 2 lbs. $25.96
Look Closer Gallon Unit 16 lbs. $110.17
Look Closer 5-Gallon Unit 80 lbs. $460.47
PMC-121/30 WET
Low Viscosity Urethane Rubber - Shore A 30 Hardness - WET Formula 1A:1B By Volume - No Scale Necessary.
Look Closer Trial Unit 2 lbs. $25.96
Look Closer Gallon Unit 16 lbs. $110.17
Look Closer 5-Gallon Unit 80 lbs. $460.47
PMC-121/50 WET
Low Viscosity Urethane Rubber - Shore A 50 Hardness - WET FORMULA ONLY 1A:1B By Volume - No Scale Necessary.
Look Closer Trial Unit 2 lbs. $25.96
Look Closer Gallon Unit 16 lbs. $110.17
Look Closer 5-Gallon Unit 80 lbs. $460.47

Technical & Safety

Technical Bulletin

 

Additional Documents

alertA release agent is required to remove cured urethane rubber from most surfaces.
alertMany surfaces need to be sealed before applying urethane rubber.