Plasti-Paste EPOXY

Trowelable Epoxy Paste

Plasti-Paste™ EPOXY is an epoxy-based version of Smooth-On’s popular urethane Plasti-Paste™ products. It is a two component, fiber-filled epoxy designed for vertical surface application. Part A is a paste and Part B is a liquid. Mix ratio is 2A: 1B by volume or weight. Pot life is 40 minutes and cure time is 16 hours at room temperature depending on mass. Applying heat can reduce cure time. Mixed material holds a vertical surface without sagging and cures very rigid and strong.

Price and Purchasing

Call to Order

Subtotal:
ProductSizeNet WeightPrice
Quantity

Plasti-Paste EPOXY

Trowelable Support Shell Plastic. 2A:1B By Volume Mix Ratio - No Scale Required.
WARNING: Prop 65 Notice
WARNING: Known to the state of CA to cause cancer, birth defects or reproductive harm - www.P65Warnings.ca.gov
 Trial Unit 3 lbs. 61219157
Gallon Unit 12 lbs. 1686625232
5 Gallon Unit 60 lbs. 752281,12541

Document Downloads

Technical Bulletin

Safety Data Sheet

Videos

Plasti-Paste EPOXY Video:

Using Plasti-Paste™ EPOXY to Make a Support Shell for a Brush On Silicone Rubber Mold