Casting Concrete Stone Veneer Using Vytaflex® Mold Rubber
Casting Concrete Will Never Be The Same!
Formulated especially for casting concrete, VytaFlex® Mold Rubbers are next
generation urethanes that feature Smooth-On's V-Polymer® Technology.
It's the V-Polymer Technology:
that gives VytaFlex rubbers superior physical & performance properties.
that gives concrete castings a surface finish you're going to love.
that gives VytaFlex rubbers long-term dimensional stability.
that gives VytaFlex molds the ability to render color-accurate castings every time.
"We've been cycling VytaFlex molds for over three years now and they show no signs of
giving out at all." – Dale Groff,
Lancaster Stone,
Lancaster, PA
1 - Stone models are sealed with SuperSeal® sealing agent and Universal® Mold Release is applied to all surfaces that will come in contact with the mold rubber.
2 - Measure and mix VytaFlex® 40 mold rubber and pour slowly over model.
3 - Demold Original Model.
4 - Pigment Mold Cavity.
5 - Cast Concrete Into The Mold.
6 - Let Concrete Set.
7 - After the concrete has cured, the mold is stripped off the casting, cleaned & ready for casting again.
8 - VytaFlex® urethane rubber molds can yield hundreds of castings
