Cure accelerator for Mold Max 27T and 15T translucent tin-cured silicones.
Important: Thoroughly Pre-mix Accel T with Part B before adding Part A. Be aware that the working time is drastically reduced with the addition of Accel T.
FastCat 30 silicone rubber catalyst will accelerate the cure time of Mold Max 30 silicone rubber. Used in place of (or in combination with) Mold Max 30 regular Part B catalyst, FastCat 30 will reduce the demold time from overnight to as little as 30 minutes.
Note: working time is reduced in proportion to the amount of FastCat 30 added. Adding FastCat reduces the library and production life of the cured rubber vs. our Mold Max regular catalyst.
