EZ Spray Silicone is a platinum cure silicone rubber developed specifically for spraying through the EZ~Spray Junior Cartridge System.  With no or minimal surface preparation, EZ Spray Silicone can be sprayed onto vertical surfaces for making fast rubber molds of large surface areas.  After a suitable thickness is attained, EZ Spray Silicone cures in 1 hour with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Application of a support shell is achieved by spraying Smooth-On’s EZ~Spray Plastic over the rubber mold after it has fully cured.  Read the EZ~Spray Junior manual prior to spraying.

Product Name:	A:B Mix Ratio	Color	Demold Time	Elongation at Break	Mixed Viscosity	Pot Life	Shore A Hardness	Tear Strength	Tensile Strength	Weight: CU.IN./LB
EZ-Spray® 35 Silicone Rubber	1A:1B by volume	Purple	1 hour	415%	17000 cps	1.5 minutes	35	100 pli	490 psi	24.1

Avoiding a very expensive repair bill by using EZ-Spray® Rubber

Replacing Crumbling Stonework at a University in Australia

Spraying Mold Rubber And Plastic

J and J Architectural Plastics Finds a New Use for duoMatrix® NEO

Digg this   |   Google Bookmark this   |   Add to Yahoo myWeb