Reynolds Advanced Materials - Mold making and casting Home Locations Seminars Videos And More News Home applications how to faq technical info
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
 
 
  Your Account
Your Email Address
Your Password
Forget your password?

Click here to create an account







  Information
Terms and Conditions
Shipping and Returns
Technical Assistance Policy
Privacy
Life Casting Silicone, Alginate and Accessories  
Body Double™ Skin Safe Lifecasting Silicone Rubber
 Body Double™ Skin Safe Lifecasting Silicone Rubber
Body Double™ Skin Safe Lifecasting Silicone Rubber
Body Double® "Standard Set" and Body Double® "Fast Set" are long lasting skin safe lifecasting silicone rubbers that can be applied directly to the skin to make molds of the face, hands and other body parts.

The rubber cures quickly and will reproduce perfect detail from any original model - far better detail than any alginate.
clseal_r_small_100
One Casting or Many . . . For About The Same Price:
Unlike alginates, which are good for one only casting, Body Double® will last for many castings of almost any material including plaster, Matrix Neo, wax, resins (Smooth-Cast urethanes, polyester, etc.), Low-temperature melt metal alloys, etc. And the amount of Body Double®

used per mold is less than most alginates, so the cost per mold is about the same.

  • Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 20 minutes
  • Body Double® "Fast Set" for fast turn around. Working time of 90 seconds and a demold time of 5 minutes

*Depending on material temperature, ambient temperature and body temperature. See Technical Bulletin for full details. DO NOT USE THIS PRODUCT WITHOUT READING THE TECHNICAL BULLETIN AND MATERIAL SAFETY DATA SHEET

How much Body Double® do you need?  Click here for a visual coverage chart.


Body Double® SILK
 Body Double® SILK
Body Double® SILK
Body Double® SILK is a self-releasing platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce excellent detail from any original model.

Body Double® SILK will release from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.). Release cream or Hyperfolic are not needed when using Body Double® SILK. Body Double® SILK will last for many castings of almost any material including plaster, Matrix® Neo®, wax, resins (Smooth-Cast urethanes, polyester, etc.)

Body Double® SILK has a working time of 6 minutes and a demold time of 20 minutes (depending on material temperature, ambient temperature and body temperature – see the technical bulletin for details).

Lifecasting Alja-Safe™ Starter Kit
 Lifecasting Alja-Safe™ Starter Kit
Lifecasting Alja-Safe™ Starter Kit
 lifecastinglogosmall_390

Alja-Safe™ Skin Safe Crystalline-Silica Free Alginate
 Alja-Safe™ Skin Safe Crystalline-Silica Free Alginate
Alja-Safe™ Skin Safe Crystalline-Silica Free Alginate
Alja-Safe™ is a new addition to the Smooth-On family of "Life Casting" mold making materials. Alja-Safe™ alginate is suitable for making "temporary" molds of the face, hands and other body parts. (For making re-usable molds of any body part, use "Body Double™" silicone rubber.)

What's Sets Alja-Safe™ Apart? In addition to being an exceptional skin safe body molding material, Alja-Safe™ alginate does not contain free crystalline silica (a known carcinogen). Alja-Safe™ also captures detail better than other alginates, giving you a more accurate reproduction of your original.

Alja-Safe™ is easy to use and cures quickly. It reproduces fine detail and makes and excellent temporary mold - good for one or two reproductions of any body part. You can then cast plaster, Matrix™ NEO™ (polymer modified gypsum) or Smooth-Cast™ 300Q fast urethane resin into the mold to make a reproduction.

NOTE - ALL SPECIFICATIONS OBTAINED USING 80°F / 23°C WATER

Working time and demold time can be reduced by using warmer water. Cooler water will give a longer working time and extend the demold time.


Alja-Safe® Acrobat® Fiber Reinforced Alginate
 Alja-Safe® Acrobat® Fiber Reinforced Alginate
Alja-Safe® Acrobat® Fiber Reinforced Alginate
Alja-Safe® Acrobat® is a fiber reinforced “non-sag” version of original Alja-Safe® life casting alginate. Acrobat is thicker and holds vertical surfaces allowing the user better control for making molds of the face, torso, etc. Acrobat® reproduces perfect detail from all body surfaces and is good for making temporary molds that can be used to make highly detailed reproductions cast in wax, plaster, Matrix® NEO® (polymer modified gypsum), platinum cure silicone or Smooth-Cast® 300Q ultra-fast urethane resin.

Easy To Use – Mix ratio is 1 part Alja-Safe® Acrobat® powder sifted into 1 part water (1:1 by volume). Working time is 5 minutes and cure time is 8 minutes, assuming a water temperature of 80° F / 27° C.

Like original Alja-Safe® Acrobat® is skin safe and does not contain crystalline silica (a known carcinogen). For making re-usable molds of any body part, use Body Double® silicone rubber.

Alja-Safe® BREEZE Liquid Alginate
 Alja-Safe® BREEZE Liquid Alginate
Alja-Safe® BREEZE Liquid Alginate

No powder - no dust! Alja-Safe® Breeze (Patent Pending) is a new liquid alginate which blends easily with water, creating a unique, skin safe moldmaking material. Alja-Safe® Breeze is perfect for making single-use pourable molds of hands, feet and other body parts. It captures excellent detail, giving you an accurate reproduction of your original. If you want to make a mold of vertical body surfaces, you can use original Alja-Safe® or Alja-Safe® Acrobat®.

Alja-Safe® Breeze is easy to use and cures quickly. It reproduces fine detail and makes an excellent temporary mold – good for one or two reproductions of any body part. You can then cast plaster, Matrix® NEO® (polymer modified gypsum), Smooth-Cast® 300Q ultra-fast urethane resin or platinum silicone (such as Dragon Skin® FX Pro) into the mold to make a reproduction.

For making re-usable molds of any body part, use Body Double® silicone rubber.


Body Double Release Cream
 Body Double Release Cream
Body Double Release Cream
Body Double® Release Cream (available from Smooth-On) is a non-toxic skin conditioner that will aid in releasing Body Double® mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply Body Double® Release Cream to all skin surfaces (bare and hair covered) that will contact mold rubber. Take special care to aggressively massage and work the cream into and over body hair. Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber which will be difficult & painful to remove.

Plaster Bandages - For Creating Quick Support Shells
 Plaster Bandages - For Creating Quick Support Shells
Plaster Bandages - For Creating Quick Support Shells
Plaster bandage material is immersed in water and layered over cured Body Double™ mold rubber or Alja-Safe™ alginate. Bandages dry and form a rigid support shell (or "mother mold") that holds the rubber mold in shape during the casting process.

Bandages available in 4" and 8" widths x 5 yards.


Lifecasting How-To Videos
 Lifecasting How-To Videos
Lifecasting How-To Videos

This video covers the essentials on life casting using Alja-Safe™ alginate and Body Double™ Silicone Rubber.

With over 90 minutes of step-by-step instruction, this video will show you how to:

  • Use Alja-Safe alginate to make a mold and casting of a hand
  • Use Alja-Safe alginate to make a mold and casting of an arm
  • Use Alja-Safe alginate to make a mold and casting of a face
  • Use Body Double™ silicone rubber to make a mold and casting of a female torso **"Life Casting With Alginate And Skin-Safe Silicone - Shows Nude Model In a Studio Setting" DVD Only
  • Use Body Double™ silicone rubber to make a mold and casting of a human head

In addition, the DVD contains a bonus section demonstrating the latest in platinum silicone rubber skin effect materials from Smooth-On. This includes creating wild skin effects with Psycho Paint, using Skin Tite on-skin adhesive and appliance builder, and using Slacker tactile mutator to alter silicone rubber for life-like skin effects.

• Videos are non-returnable, non-refundable

** NOTICE: The "Life Casting With Alginate And Skin-Safe Silicone - Shows Nude Mdoel In a Studio Setting" DVD contains images of a nude model in an artist's studio setting. Viewer's discretion is advised.




Reynolds Advanced Materials | Copyright © 2013

E-Commerce Solutions