Free Form® AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications.  This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use.   Free Form® AIR is mixed by hand with a 1A:1B by volume mix ratio.  It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties.  Cured Free Form® AIR is so lightweight, it will float in water.  It can be sanded, shaped, drilled, tapped and CNC machined/routered.  It will readily accept any paint.  Free Form can also be color pigmented with SO-Strong® or Ignite® colorants.

After mixing, Free Form® AIR can be pressed into a mold to make a lightweight, detailed casting. It will hold vertical surfaces and can be applied to almost any surface including polystyrene foam for rough sculpting.   Free Form® Air putty can also be used to make rigid support shells or mother molds.
Epoxy Laminating; Laminate Free Form® AIR putty in between layers of EpoxAmite® Laminating Epoxy and fiberglass cloth, carbon or other fiber for making lightweight composite parts.  Eliminates the need to make multiple layers of laminating with liquid epoxy; saves time and labor.

Epoxy Tooling Applications – use as a filleting material.  Also good for jig and fixture construction.

Used as a lightweight adhesive, Free Form® AIR will bond to itself and a variety of surfaces including wood, stone and EpoxAcoat® Red surface coat epoxy.  Free Form will even cure under water.

Pot Life/Working Time; this material is mass sensitive.  The more material you mix at one time, the less time you have to work with it. Working tip;  If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot life.

• Thickness;   1.5 inch (3.81 cm) – pot life is 30 minutes, handling time is 2.5 hours, full cure in 24 hours.
• Thickness;   3/8” (0.95 cm) – pot life is 60 minutes, handling time is 4 hours, full cure in 24 hours.
• Thickness;   1/8” (0.32 cm) - pot life is 120 minutes; handling time is 8 hours, full cure in 24 hours.

Free Form® EARTH is a sculptable, clay-like putty suitable for sculpting fine detail using tools or shaping by hand.
This is a low-odor, low shrink epoxy that is inexpensive, easy to use for a variety of art related and industrial applications.

Maximum Usability - Just Add Water; you can change the consistency and workability of Free Form® EARTH by adding water when mixing A+B components.  Putty surface can be smoothed with water while sculpting.

Parts A & B are mixed in equal amounts by hand.  Working time is a long 2.5 hours and Free Form® EARTH cures overnight to a hard, rigid epoxy that is very strong and waterproof. Cured putty is easily painted with acrylic paints.

Free Form® EARTH does not contain crystalline silica (which is a known carcinogen). It can be safely sanded, shaped, and painted.
Used as a repair adhesive, Free Form® EARTH will bond to itself and a variety of surfaces including wood, metal, glass, stone, and concrete.  Free Form® EARTH will even cure under water.